Wall Mount ‘H’ Back Plate Standard hinge

For tempered safety glass of thickness 5/16” to 1/2”

Up to 80 lbs. of weight and a door of width 28” with two hinges

Up to 120 lbs. of weight and a door of width 32” with three hinges 

Self-centering within 15 degrees of the closing position

Available in Beveled and Square

Wall mount and full back plate standard hinge

Hinges can swing 90 degrees in and 90 degrees out 

Suitable for glass panels of thickness 3/8” to 1/2″

Two hinges together can hold up to 110 lbs. of weight 

Three hinges together can hold up to 140 lbs. of weight

Available in Beveled and Square

180 degree glass-to-glass standard hinge

Up to 80 lbs. using two hinges with a door of width 28”

Self-centering within 15 degrees of the closing position

Available in Beveled and Square

135 degree glass-to-glass standard hinge

For tempered safety glass of thickness 5/16” to 1/2″

Up to 80 lbs. using two hinges with a door of width 28”

Up to 120 lbs. using three hinges with a door of width 32”

Self-centering within 15 degrees of the closing position

Available in Beveled and Square

Top or bottom mount

Can hold up doors with a maximum weight of 100 lbs. and 31” width with the use of two hinges

Self-centering within 15o of closed position

Four springs for maximum retention strength

Available in Beveled and Square

Back-to-Back Tubular Pull Handle, made with 1.5 mils thick heavy tubing and is 3/4″ in diameter. 

For a glass of thickness 1/4” to 1/2” and requires fabricated glass with a hole of 1/2” diameter. 

One bar for each side of the door

To secure glass panels for shower enclosures  

For glass of thickness 5/16” to 1/2″

Requires 5/8” or 3/4″ hole in glass panel 

Available in Beveled and Square

For glass thicknesses of 5/16" to 1/2"

Requires 5/8" or 3/4" hole in glass panel

Available in Beveled and Square

Holds glass panels in position while sealant cures 

For glass of thickness 5/16” to 1/2″

For a glass of  thickness  3/8″, and 1/2″  

Single Aluminum Header Extrusion of 66″, 98″ or 144” 

Single Aluminium Snap-In Filler meant for door pocket 

Two Brass Wall Mounting Brackets- BWB2 (included)

Ideal for securing fixed panels of glass 3/4" Thick Edge

For use on its own or with other regular depth U-channels

For use with a glass of thickness 3/8” 

Available in 95” and 144” stock lengths

End caps to conceal ends of channels (sold separately)